CompoNet Slaves (I/O Terminals)

CRT1-[]D16(-1)/ CRT1-[]D08(-1)/ CRT1-ROS[]/-ROF[]

Digital I/O Slave Units
Intelligent Transistor Word Slave Units. Expansion I/O units of 8 points can be connected to the terminal. Combination of input and output is possible. Default 16-input type or 16-output type.

CRT1-[]D16TA(-1)/ CRT1-[]D[]TAH(-1)

Digital I/O Slave Units with Screw Terminal Blocks (3-tier Terminal Block)
Doubling up wires on terminals is unnecessary and wiring locations are easy to understand with these Smart Slaves.

CRT1-[]D16S(-1)/ CRT1-[]D32S(-1)/ CRT1-[]D[]SH(-1)

Digital I/O Slave Units with Connectors
Industry-standard Sensor Connectors for easy connection to pre-wired sensors and easy installation without special tools.

CRT1-V[]D08S(-1)

Digital I/O Slave Units with e-CON Connector (Vertical Type)
A vertical slave unit of little wiring and size. Industrial standard e-CON connectors allow direct connection of the unit to sensing devices without use of terminal blocks.

CRT1-V[]D16ML(-1)

Digital I/O Slave Units with MIL Connector (Vertical Type)
Thinnest in the industry! Ultimately little space and wiring are required.

CRT1-V[]D32ML(-1)

Digital I/O Slave Units with MIL Connector (Vertical type)
Aggregation of multi-I/O points! A compact and little wiring slave with 32 points and MIL connector.

CRT1-[]D16SL(-1)/ CRT1-[]D08SL(-1)

Digital I/O Slaves with Clamp Terminals
Screw-less terminal wiring further reduces wiring work and saves labor at the production site.

CRT1-AD04/DA02

Analog I/O Slave Units
Intelligent Analog Slave Unit with 4-point analog input or 2-point analog output. Comes with built-in functions: comparison, disconnected line detection, moving average and etc. Resolution of 1/6000.

CRT1-VAD04/VDA02

Analog I/O Slave Units with MIL Connectors/e-CON Connectors
Industry's slimmest Analog Slave Units (15 mm) help save space in equipment and panels.

CRT1-VAD02[][]D/ CRT1-VDA02[][]D

Analog Slave Unit with Numerical Indicator
Ensure easy setting in system start-up. Numerical indicator facilitates system start-up and maintenance work.

CRT1-TS04

Temperature Input Units
High-speed transfer of temperature data with CompoNet. Enhanced smart functions.

XWT-[]D08(-1)/ XWT-[]D16(-1)

Expansion Units
Expansion I/O units make expansion easy. One Expansion Unit can be added to each Digital I/O Slave Unit.

XWT-V[]D08S(-1)/ XWT-V[]D16ML(-1)

Expansion Units
Expansion Digital Input/Output Units connectable to analog I/O slave unit (numerical indicator type).

GRT1-CRT

SmartSlice CompoNet Communications Unit
The CompoNet-compliant unit can interface up to 256 inputs and 256 outputs at one node.

CRT1B-[]D02S(-1)

IP20 Bit Slave Units with e-CON Connectors
IP20 Intelligent Transistor Bit Slave Units with 2-/4-inputs or 2-outputs. Using industry standard e-CON connectors. Comes with pre-wired network insulated flag cable.

CRT1B-[]D02JS(-1)/ CRT1B-[]D04JS(-1)

Bit Slave Units with Compact Connectors
Bit slave of smallest class in industry, innovation in wiring for any type of machinery.

CRT1B-[]D0[]SP(-1)

IP54 Bit Slave Units with e-CON Connector
IP54 Intelligent Transistor Bit Slave Units with 2-/4-inputs or 2-outputs. Using industry standard e-CON connectors. Comes with pre-wired network insulated flag cable.

CRT1B-MD04SLP(-1)

Bit Slave Units with Screwless-clamp Terminal Block
IP54 Intelligent Transistor Bit Slave Units with 2 inputs/2 outputs per unit. Using Screwless-clamp Terminal Block for easy wiring. Comes with pre-wired network insulated flag cable.

CRS1-RPT01

Repeater Unit
Expand network up to 1.5 km with 2 segment layers. Maximum number of repeater per network is 64 units.

ZS-CRT

CompoNet Sensor Communication Unit
A communications gateway that connects smart sensors to CompoNet. High-Speed smart sensor measurement data collection at the Programmable Controller or Programmable Terminal.